Login problem with ver 2.0

In this board you can talk about general questions about phpMyFAQ

Moderator: Thorsten

Post Reply
Lakis
Posts: 5
Joined: Thu May 17, 2007 11:32 am

Login problem with ver 2.0

Post by Lakis »

Hi,

Firstly I would like to thank you for an exellent piece of software!

I have been using phpmyfaq ver 1.6.11 with no problem and I am quite impressed. However, when i tried to install ver 2.0 I faced the following issue.

I login (either admin section or the normal operators section) with no problem. However any click on any link after the login will simply log me out.

In the case of the admin section, i always end up to the admin login page.

I have seen a couple of posts for a similar issue but none of those helped me in solving my problem.

One thing I have noticed when I login to the admin page, I can see on the top right corner the following:
--------------------------------------
Time to your session expiration
Loading...
--------------------------------------

I am running IIS6 with PHP Version 5.2.1 and MySql 5.1.17

Can you help please?

Thanks

Lakis
Top
Thorsten
Posts: 15727
Joined: Tue Sep 25, 2001 11:14 am
Location: #phpmyfaq
Contact:
Contact Thorsten

Post by Thorsten »

Hi,

could you please enable the DEBUG mode in inc/Init.php and post possible erros here?

Thanks!

bye
Thorsten
phpMyFAQ Maintainer and Lead Developer
amazon.de Wishlist
Top
Lakis
Posts: 5
Joined: Thu May 17, 2007 11:32 am

Post by Lakis »

Hi Thorsten,

I have enabled DEBUGGING and got the following warnings:

Top of screen

Warning: session_start() [function.session-start]: open(C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\php\session\sess_vr6uq5hq185eorfvi0om6f2kg0, O_RDWR) failed: Permission denied (13) in C:\Inetpub\wwwroot\TCTFAQ2.0\admin\index.php on line 42

And then at the bottom the following:
Warning: Unknown: open(C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\php\session\sess_vr6uq5hq185eorfvi0om6f2kg0, O_RDWR) failed: Permission denied (13) in Unknown on line 0

Warning: Unknown: Failed to write session data (files). Please verify that the current setting of session.save_path is correct (C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\php\session) in Unknown on line 0

Thanks

Lakis
Top
Lakis
Posts: 5
Joined: Thu May 17, 2007 11:32 am

Post by Lakis »

Hi Again,

Thanks for you help Thorsten. After looking at the debug information I saw the problem.

The IUSR_<Machinename> did not have rights to write in that directory.

I have modified my php.ini to save the sessions in another directory and gave appropriate rights for the IUSR_<Machinename> user.

Everything works fine now.

Thanks again

Lakis
Top
three_sixteen
Posts: 11
Joined: Mon Jan 22, 2007 11:42 pm
Contact:
Contact three_sixteen

Post by three_sixteen »

Bah,

I'm having this problem too. My debug information follows.. unfortunatley I couldn't discern much from it myself.

Code: Select all

DEBUG INFORMATION:
PMF_Configuration->getAll() in line 87:

            SELECT
                config_name, config_value
            FROM
                faq_faqconfig


PMF_AuthDb->checkLogin() in line 135:

          SELECT
            login
          FROM
            faq_faquserlogin
          WHERE
            login = 'admin'
        


db_mssql->error() in line 323:

SELECT @@ERROR AS ErrorCode


PMF_AuthDb->checkPassword() in line 140:

          SELECT
            login,
            pass
          FROM
            faq_faquserlogin
          WHERE
            login = 'admin'
        


db_mssql->error() in line 248:

SELECT @@ERROR AS ErrorCode


PMF_User->getUserByLogin() in line 146:

          SELECT
            user_id,
            login,
            account_status
          FROM
            faq_faquser
          WHERE
            login = 'admin'
        


PMF_UserData->load() in line 373:

          SELECT
            last_modified, display_name, email
          FROM
            faq_faquserdata
          WHERE
            user_id = 1


PMF_CurrentUser->updateSessionId() in line 150:

UPDATE
                        faq_faquser
                    SET
                        session_id          = 'onlltol473aolhkgrpv09k1ur3',
                        session_timestamp   = 1187383520,
                        last_login = '20070817134520',
                        ip                  = '172.16.200.254'
                    WHERE
                        user_id = 1


PMF_CurrentUser->login() in line 89:

                UPDATE
                    faq_faquser
                SET
                    auth_source = 'local'
                WHERE
                    user_id = 1


PMF_PermBasic->getAllRightsData() in line 122:

SELECT
                        right_id,
                        name,
                        description,
                        for_users,
                        for_groups
                    FROM
                        faq_faqright
                    ORDER BY
                        right_id ASC


PMF_PermBasic->getUserRights() in line 309:

            SELECT
                faq_faqright.right_id AS right_id
            FROM
                faq_faqright,
                faq_faquser_right,
                faq_faquser
            WHERE
                faq_faqright.right_id = faq_faquser_right.right_id AND
                faq_faquser.user_id   = 1 AND
                faq_faquser.user_id   = faq_faquser_right.user_id
        


db_mssql->getTableStatus() in line 269:

            SELECT
                obj.name AS table_name,
                idx.rows AS table_rows
            FROM
                sysobjects obj, sysindexes idx
            WHERE
                    idx.id = OBJECT_ID(obj.name)
                AND idx.indid < 2
                AND obj.xtype = 'u'
            ORDER BY obj.name


db_mssql->server_version() in line 350:

SELECT @@version AS SERVER_VERSION


COOKIES:
pmf_lang: en
pmf_sid: 1
pmf_auth_: ieelc1abass4o8g9boapev3hp4

TABLES & RECORDS:
faq_faqadminlog: 0
faq_faqcaptcha: 0
faq_faqcategories: 0
faq_faqcategory_group: 0
faq_faqcategory_user: 0
faq_faqcategoryrelations: 0
faq_faqchanges: 0
faq_faqcomments: 0
faq_faqconfig: 33
faq_faqdata: 0
faq_faqdata_group: 0
faq_faqdata_revisions: 0
faq_faqdata_tags: 0
faq_faqdata_user: 0
faq_faqglossary: 0
faq_faqgroup: 0
faq_faqgroup_right: 0
faq_faqlinkverifyrules: 0
faq_faqnews: 0
faq_faqquestions: 0
faq_faqright: 29
faq_faqsessions: 2
faq_faqtags: 0
faq_faquser: 2
faq_faquser_group: 0
faq_faquser_right: 29
faq_faquserdata: 2
faq_faquserlogin: 2
faq_faqvisits: 0
faq_faqvoting: 0
Top
Thorsten
Posts: 15727
Joined: Tue Sep 25, 2001 11:14 am
Location: #phpmyfaq
Contact:
Contact Thorsten

Post by Thorsten »

Hi,

do you get any warnings?

bye
Thorsten
phpMyFAQ Maintainer and Lead Developer
amazon.de Wishlist
Top
three_sixteen
Posts: 11
Joined: Mon Jan 22, 2007 11:42 pm
Contact:
Contact three_sixteen

Warnings

Post by three_sixteen »

No, I didn't get any warnings - which is the strange part.

I checked directory permissions for the sessions folder to ensure that they were writable to the server and they are.

I'm at a bit of a loss as to why it's not working.
Top
webchills
Posts: 26
Joined: Fri Jan 31, 2003 12:30 pm
Location: Wien
Contact:
Contact webchills

session problem

Post by webchills »

I have the same issue here, trying 2.03 on a Windows Server with PHP 4.3.9 and a MSSQL database. I can login but get back to the login page when clicking any link in the admin menu. There are no warnings, when I enable the debug mode, here is what I get:

Code: Select all

phpMyFAQ Version phpMyFAQ 2.0.3 
Server Software Microsoft-IIS/6.0 
PHP Version PHP 4.3.9 
Register Globals on 
Safe Mode off 
Open Basedir off 
Database Server Mssql 
Database Client Version Database Server Version Microsoft SQL Server 2000 - 8.00.818 (Intel X86) May 31 2003 16:08:15 Copyright (c) 1988-2003 Microsoft Corporation Standard Edition on Windows NT 5.2 (Build 3790: ) 
Webserver Interface CGI-FCGI 
PHP Extensions standard, bcmath, calendar, ctype, com, ftp, mysql, odbc, overload, pcre, session, tokenizer, xml, wddx, zlib, gd, imap, mssql, oci8, oracle, pdf 
NOTE: Art is resistance. Thank you very much for inspiration and everything else, L.
DEBUG INFORMATION:
pmf_currentuser->getuserbylogin() in line 146: 
          SELECT
            user_id,
            login,
            account_status
          FROM
            knowledgebase_faquser
          WHERE
            login = 'admin'
        
pmf_userdata->load() in line 373: 
          SELECT
            last_modified, display_name, email
          FROM
            knowledgebase_faquserdata
          WHERE
            user_id = 1
pmf_currentuser->updatesessionid() in line 150: 
UPDATE
                        knowledgebase_faquser
                    SET
                        session_id          = '72e3dedf3a074d582e410d6d2b7b94d4',
                        session_timestamp   = 1187880695,
                        last_login = '20070823165135',
                        ip                  = '10.236.110.93'
                    WHERE
                        user_id = 1
pmf_currentuser->login() in line 89: 
                UPDATE
                    knowledgebase_faquser
                SET
                    auth_source = 'local'
                WHERE
                    user_id = 1
pmf_permmedium->getallrightsdata() in line 122: 
SELECT
                        right_id,
                        name,
                        description,
                        for_users,
                        for_groups
                    FROM
                        knowledgebase_faqright
                    ORDER BY
                        right_id ASC
pmf_permmedium->getuserrights() in line 746: 
            SELECT
                knowledgebase_faqright.right_id AS right_id
            FROM
                knowledgebase_faqright,
                knowledgebase_faquser_right,
                knowledgebase_faquser
            WHERE
                knowledgebase_faqright.right_id = knowledgebase_faquser_right.right_id AND
                knowledgebase_faquser.user_id   = 1 AND
                knowledgebase_faquser.user_id   = knowledgebase_faquser_right.user_id
        
pmf_permmedium->getusergrouprights() in line 747: 
            SELECT
                knowledgebase_faqright.right_id AS right_id
            FROM
                knowledgebase_faqright,
                knowledgebase_faqgroup_right,
                knowledgebase_faqgroup,
                knowledgebase_faquser_group,
                knowledgebase_faquser
            WHERE
                knowledgebase_faquser.user_id   = 1 AND
                knowledgebase_faquser.user_id   = knowledgebase_faquser_group.user_id AND
                knowledgebase_faqgroup.group_id = knowledgebase_faquser_group.group_id AND
                knowledgebase_faqgroup.group_id = knowledgebase_faqgroup_right.group_id AND
                knowledgebase_faqright.right_id = knowledgebase_faqgroup_right.right_id
        
pmf_permmedium->getusergroups() in line 149: 
            SELECT
                knowledgebase_faqgroup.group_id AS group_id
            FROM
                knowledgebase_faquser,
                knowledgebase_faquser_group,
                knowledgebase_faqgroup
            WHERE
                knowledgebase_faquser.user_id   = 1 AND
                knowledgebase_faquser.user_id   = knowledgebase_faquser_group.user_id AND
                knowledgebase_faqgroup.group_id = knowledgebase_faquser_group.group_id
        
db_mssql->gettablestatus() in line 269: 
            SELECT
                obj.name AS table_name,
                idx.rows AS table_rows
            FROM
                sysobjects obj, sysindexes idx
            WHERE
                    idx.id = OBJECT_ID(obj.name)
                AND idx.indid < 2
                AND obj.xtype = 'u'
            ORDER BY obj.name
db_mssql->server_version() in line 350: 
SELECT @@version AS SERVER_VERSION

COOKIES:
pmf_lang: de
pmf_auth_: a4436756888aa9c1871914b624c97aad
And when I click on any link and get back to the login page, this is what I get:

Code: Select all

DEBUG INFORMATION:

COOKIES:
pmf_lang: de
pmf_auth_: 16fc40982e295e784902654840171013
ASPSESSIONIDASADBSBR: CPLDNDKCEOPIJBCKLJKAPAPE
nachname: xxx
vorname: xxx
log: Ja
Benutzername: xxx
SuperUser: nein
Top
DavidBirt
Posts: 1
Joined: Mon Sep 03, 2007 3:11 pm
Location: Geneva, Switzerland

Login Problems

Post by DavidBirt »

Hello -

I am having the same problem installing v2.03 using IIS 5 , PHP 5.2.4 & MSSQL 2000

Data is written to the SQL tables, but I always get returned to the admin screen. In debug mode I get the following:
[code]
DEBUG INFORMATION:
PMF_Configuration->getAll() in line 87:

SELECT
config_name, config_value
FROM
faqconfig


PMF_AuthDb->checkLogin() in line 135:

SELECT
login
FROM
faquserlogin
WHERE
login = 'admin'



db_mssql->error() in line 323:

SELECT @@ERROR AS ErrorCode


PMF_AuthDb->checkPassword() in line 140:

SELECT
login,
pass
FROM
faquserlogin
WHERE
login = 'admin'



db_mssql->error() in line 248:

SELECT @@ERROR AS ErrorCode


PMF_User->getUserByLogin() in line 146:

SELECT
user_id,
login,
account_status
FROM
faquser
WHERE
login = 'admin'



PMF_UserData->load() in line 373:

SELECT
last_modified, display_name, email
FROM
faquserdata
WHERE
user_id = 1


PMF_CurrentUser->updateSessionId() in line 150:

UPDATE
faquser
SET
session_id = '86b5a6fddl3r04nngor70ce2p3',
session_timestamp = 1188829092,
last_login = '20070903161812',
ip = '127.0.0.1'
WHERE
user_id = 1


PMF_CurrentUser->login() in line 89:

UPDATE
faquser
SET
auth_source = 'local'
WHERE
user_id = 1


PMF_PermBasic->getAllRightsData() in line 122:

SELECT
right_id,
name,
description,
for_users,
for_groups
FROM
faqright
ORDER BY
right_id ASC


PMF_PermBasic->getUserRights() in line 309:

SELECT
faqright.right_id AS right_id
FROM
faqright,
faquser_right,
faquser
WHERE
faqright.right_id = faquser_right.right_id AND
faquser.user_id = 1 AND
faquser.user_id = faquser_right.user_id



db_mssql->getTableStatus() in line 269:

SELECT
obj.name AS table_name,
idx.rows AS table_rows
FROM
sysobjects obj, sysindexes idx
WHERE
idx.id = OBJECT_ID(obj.name)
AND idx.indid < 2
AND obj.xtype = 'u'
ORDER BY obj.name


db_mssql->server_version() in line 350:

SELECT @@version AS SERVER_VERSION


COOKIES:
pmf_lang: en
pmf_auth__: 7hfc5g0vt5llp5hrgfp8euve54

TABLES & RECORDS:
faqadminlog: 0
faqcaptcha: 0
faqcategories: 0
faqcategory_group: 0
faqcategory_user: 0
faqcategoryrelations: 0
faqchanges: 0
faqcomments: 0
faqconfig: 33
faqdata: 0
faqdata_group: 0
faqdata_revisions: 0
faqdata_tags: 0
faqdata_user: 0
faqglossary: 0
faqgroup: 0
faqgroup_right: 0
faqlinkverifyrules: 0
faqnews: 0
faqquestions: 0
faqright: 29
faqsessions: 2
faqtags: 0
faquser: 2
faquser_group: 0
faquser_right: 29
faquserdata: 2
faquserlogin: 2
faqvisits: 0
faqvoting: 0
[/code]

Clicking on any link brings me back to the login screen with the following:

[code]PMF_Configuration->getAll() in line 87:

SELECT
config_name, config_value
FROM
faqconfig


COOKIES:
pmf_lang: en
pmf_auth__: 62qg027ne17d5ngagtgrp2v9a6

TABLES & RECORDS:
faqadminlog: 0
faqcaptcha: 0
faqcategories: 0
faqcategory_group: 0
faqcategory_user: 0
faqcategoryrelations: 0
faqchanges: 0
faqcomments: 0
faqconfig: 33
faqdata: 0
faqdata_group: 0
faqdata_revisions: 0
faqdata_tags: 0
faqdata_user: 0
faqglossary: 0
faqgroup: 0
faqgroup_right: 0
faqlinkverifyrules: 0
faqnews: 0
faqquestions: 0
faqright: 29
faqsessions: 2
faqtags: 0
faquser: 2
faquser_group: 0
faquser_right: 29
faquserdata: 2
faquserlogin: 2
faqvisits: 0
faqvoting: 0[/code]


Would love to look at this further, but I am not sure hoe to proceed.
Thanks in advance for any guidance.
Top
Eric Culpepper
Posts: 2
Joined: Thu Sep 13, 2007 9:31 pm
Location: Fort Worth, TX

I'm experiencing this same problem as well.

Post by Eric Culpepper »

I'm experiencing this exact same problem where once you log into the Administration pages, you'll be thrown back to the login screen on any option you select. I am not experiencing any PHP warnings at any point either.

The test server is a Windows 2000 server using IIS5, PHP 5.2.2, MSSQL 2000 (Build 2195, SP4) with PHP loaded as an ISAPI module.

One thing I've noticed is the pmf_auth_ COOKIE is changing and I'm guessing that shouldn't be happening. ;)

Here's the DEBUG once logged in:

Code: Select all

DEBUG INFORMATION:
PMF_Configuration->getAll() in line 87:

            SELECT
                config_name, config_value
            FROM
                KBfaqconfig


PMF_AuthDb->checkLogin() in line 135:

          SELECT
            login
          FROM
            KBfaquserlogin
          WHERE
            login = 'admin'
        


db_mssql->error() in line 323:

SELECT @@ERROR AS ErrorCode


PMF_AuthDb->checkPassword() in line 140:

          SELECT
            login,
            pass
          FROM
            KBfaquserlogin
          WHERE
            login = 'admin'
        


db_mssql->error() in line 248:

SELECT @@ERROR AS ErrorCode


PMF_User->getUserByLogin() in line 146:

          SELECT
            user_id,
            login,
            account_status
          FROM
            KBfaquser
          WHERE
            login = 'admin'
        


PMF_UserData->load() in line 373:

          SELECT
            last_modified, display_name, email
          FROM
            KBfaquserdata
          WHERE
            user_id = 1


PMF_CurrentUser->updateSessionId() in line 150:

UPDATE
                        KBfaquser
                    SET
                        session_id          = '247hrasmrt6mamq3tt877o3ig3',
                        session_timestamp   = 1189715666,
                        last_login = '20070913153426',
                        ip                  = '172.16.66.111'
                    WHERE
                        user_id = 1


PMF_CurrentUser->login() in line 89:

                UPDATE
                    KBfaquser
                SET
                    auth_source = 'local'
                WHERE
                    user_id = 1


PMF_PermBasic->getAllRightsData() in line 122:

SELECT
                        right_id,
                        name,
                        description,
                        for_users,
                        for_groups
                    FROM
                        KBfaqright
                    ORDER BY
                        right_id ASC


PMF_PermBasic->getUserRights() in line 309:

            SELECT
                KBfaqright.right_id AS right_id
            FROM
                KBfaqright,
                KBfaquser_right,
                KBfaquser
            WHERE
                KBfaqright.right_id = KBfaquser_right.right_id AND
                KBfaquser.user_id   = 1 AND
                KBfaquser.user_id   = KBfaquser_right.user_id
        


db_mssql->getTableStatus() in line 269:

            SELECT
                obj.name AS table_name,
                idx.rows AS table_rows
            FROM
                sysobjects obj, sysindexes idx
            WHERE
                    idx.id = OBJECT_ID(obj.name)
                AND idx.indid < 2
                AND obj.xtype = 'u'
            ORDER BY obj.name


db_mssql->server_version() in line 350:

SELECT @@version AS SERVER_VERSION


COOKIES:
pmf_lang: en
pmf_auth_: 15qi2kjqves0ipf1frvnk2flc7

TABLES & RECORDS:
KBfaqadminlog: 0
KBfaqcaptcha: 0
KBfaqcategories: 0
KBfaqcategory_group: 0
KBfaqcategory_user: 0
KBfaqcategoryrelations: 0
KBfaqchanges: 0
KBfaqcomments: 0
KBfaqconfig: 33
KBfaqdata: 0
KBfaqdata_group: 0
KBfaqdata_revisions: 0
KBfaqdata_tags: 0
KBfaqdata_user: 0
KBfaqglossary: 0
KBfaqgroup: 0
KBfaqgroup_right: 0
KBfaqlinkverifyrules: 0
KBfaqnews: 0
KBfaqquestions: 0
KBfaqright: 29
KBfaqsessions: 1
KBfaqtags: 0
KBfaquser: 2
KBfaquser_group: 0
KBfaquser_right: 29
KBfaquserdata: 2
KBfaquserlogin: 2
KBfaqvisits: 0
KBfaqvoting: 0
Here is the DEBUG once you are forced back to the login page:

Code: Select all

DEBUG INFORMATION:
PMF_Configuration->getAll() in line 87:

            SELECT
                config_name, config_value
            FROM
                KBfaqconfig


COOKIES:
pmf_lang: en
pmf_auth_: 1gu3pcnkfkl7nofr7hj22f9i67

TABLES & RECORDS:
KBfaqadminlog: 0
KBfaqcaptcha: 0
KBfaqcategories: 0
KBfaqcategory_group: 0
KBfaqcategory_user: 0
KBfaqcategoryrelations: 0
KBfaqchanges: 0
KBfaqcomments: 0
KBfaqconfig: 33
KBfaqdata: 0
KBfaqdata_group: 0
KBfaqdata_revisions: 0
KBfaqdata_tags: 0
KBfaqdata_user: 0
KBfaqglossary: 0
KBfaqgroup: 0
KBfaqgroup_right: 0
KBfaqlinkverifyrules: 0
KBfaqnews: 0
KBfaqquestions: 0
KBfaqright: 29
KBfaqsessions: 1
KBfaqtags: 0
KBfaquser: 2
KBfaquser_group: 0
KBfaquser_right: 29
KBfaquserdata: 2
KBfaquserlogin: 2
KBfaqvisits: 0
KBfaqvoting: 0
Thanks, the project looks interesting, I just wish I could do something with it. :)
-Eric Culpepper
Top
qafym
Posts: 2
Joined: Mon Sep 24, 2007 8:40 pm

Session loading - bad login - vers 2.0.3

Post by qafym »

hallo,

this problem is posting several times and I can't nowhere find the solution.
:shock:
So, I have the problem too:

Warning: ini_set() [function.ini-set]: A session is active. You cannot change the session module's ini settings at this time. in myfaq\inc\Init.php on line 96

Notice: A session had already been started - ignoring session_start() in myfaq\admin\index.php on line 42

Warning: Cannot modify header information - headers already sent by (output started at myfaq\inc\Init.php:96) in myfaq\admin\header.php on line 27

Warning: Cannot modify header information - headers already sent by (output started at myfaq\inc\Init.php:96) in myfaq\admin\header.php on line 28

Warning: Cannot modify header information - headers already sent by (output started at myfaq\inc\Init.php:96) in myfaq\admin\header.php on line 29

Warning: Cannot modify header information - headers already sent by (output started at myfaq\inc\Init.php:96) in myfaq\admin\header.php on line 30

Warning: Cannot modify header information - headers already sent by (output started at myfaq\inc\Init.php:96) in myfaq\admin\header.php on line 31

Warning: Cannot modify header information - headers already sent by (output started at myfaq\inc\Init.php:96) in myfaq\admin\header.php on line 32

Warning: Cannot modify header information - headers already sent by (output started at myfaq\inc\Init.php:96) in myfaq\admin\header.php on line 33

System Information

phpMyFAQ Version
phpMyFAQ 2.0.3
Server Software
Apache/2.2.0 (Win32) DAV/2 mod_ssl/2.2.0 OpenSSL/0.9.8a mod_autoindex_color PHP/5.1.2
PHP Version
PHP 5.1.2
Register Globals
off
Safe Mode
off
Open Basedir
off
Database Server
Mysqli
Database Client Version
5.0.20
Database Server Version
5.0.20-community
Webserver Interface
APACHE2HANDLER
PHP Extensions
bcmath, calendar, com_dotnet, ctype, date, ftp, iconv, odbc, pcre, Reflection, session, libxml, standard, tokenizer, zlib, SimpleXML, dom, SPL, wddx, xml, xmlreader, xmlwriter, apache2handler, gd, gettext, imap, mbstring, exif, mime_magic, ming, mssql, mysql, mysqli, openssl, pdf, PDO, pdo_mssql, pdo_mysql, soap, sockets, SQLite, xmlrpc, xsl, zip, Zend Optimizer


and here is my solution: :D


session.auto_start = 0

that's all.

bye
mike
Top
webchills
Posts: 26
Joined: Fri Jan 31, 2003 12:30 pm
Location: Wien
Contact:
Contact webchills

Re: Session loading - bad login - vers 2.0.3

Post by webchills »

qafym wrote:
and here is my solution: :D


session.auto_start = 0

that's all.
Hi Mike,
in which file do you change this setting?
Regards
Jörg
Top
qafym
Posts: 2
Joined: Mon Sep 24, 2007 8:40 pm

Post by qafym »

php.ini

mike
Top
webchills
Posts: 26
Joined: Fri Jan 31, 2003 12:30 pm
Location: Wien
Contact:
Contact webchills

Post by webchills »

I cannot modify the php.ini (phpmyfaq runs in an intranet and I have no rights to modify the php settings).
Is there any other solution?
Torsten, did you find any clue yet?
Top
Thorsten
Posts: 15727
Joined: Tue Sep 25, 2001 11:14 am
Location: #phpmyfaq
Contact:
Contact Thorsten

Post by Thorsten »

Hi,

I cannot fix the session autostart from the application. I'm still investigating this strange issue.

bye
Thorsten
phpMyFAQ Maintainer and Lead Developer
amazon.de Wishlist
Top
Post Reply

Return to “General discussions”